CNC V-CUT Machine YSVC-1200 / Pcb V Cut Machine

CNC V-CUT machine YSVC-1200 feature :

Specification

1. Machine Name: CNC V-CUT machine YSVC-1200 .

2, Power: AC220V ± 5V, 1 ¢ 50HZ 5KVA (requirements must be equipped with a power regulator)

3, The gas source: 0.5Mpa 50NL / Min

4,Vacuum: The minimum amount of wind 15m3 / min; minimum static pressure 50mm / Aq

5, Machining maximum size: 1250mm * 650mm

6, Processing minimum size: 105mm * 105mm

7. Board Thickness: 0.4mm ~ 3.2mm

8, Precision: Parallel accuracy ± 0.05mm, residual thickness precision: ± 0.05mm, pitch: ± 0.05mm Alignment of the upper and lower blade ± 0.05mm

9, The processing position: the distance from the first cutter to edge minimum 8mm, a single side of the cutting line processing unlimited number, can be set arbitrarily.

10. Machine dagger count: the number of machine processing jump knife blade and knife position can be arbitrarily set the number .

11. The residual thickness setting: the machine has three types of residual thickness can be set to three different shades of a single surface residual thickness.

12. The machine structure: machine adopts casting machine base integrated design approach, to ensure the stability of machine performance.

Second, the operating system

1. The machine uses Microsoft WindowsXP system, all english operation interface, easy to understand, approachable,Parameter setting procedure is simple. First, set the number of dimensions of the plate, followed by setting the position of the cutting line data, againSet to complete the processing of the residual thickness.

2. The machine displays illustrations, real-time tracking process icon displays the current processing position, allowing the operator In real time to understand the whole process.

3. The machine has a test function, to avoid improper setting data sheet of scrap in the complete data set after the first board using tests to test cutting short distance to check the cutting position and the actual position is consistent, as can not match the parameter correction processing.

4. Machine tool protection function is set to avoid residual thickness and tool set to set the outer diameter of improper the tool is damaged.

Third, the machine hardware configuration

1. The machine axes were performed using imported servo control system to ensure the stability and performance of the machine precision, pushing the plate axis,Knife shaft and on the knife-axis servo and servo motors, servo wheel servo and servo motors.

2.The main control by the United States six-axis motion control card.

YUSH Electronic Technology Co.,Ltd  was founded in 2005,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry.

Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator production base in China.