1.Application
| 1: Semiconductor | 2: Automotive electronics | 3: PCB’A | 4: LED |
| 5: BGA/QFN inspection | 6: Aluminum die casting | 7: Mould | 8: Electrical and mechanical components |
| 9: Biological agriculture seed | 10: Aviation component | 11: Wheel hub | 12: Wire/USB/Plug |
2.Functions and Features
| Function | Advantages |
| X-ray tube and detector can move along Z direction, Speed of table moving along X-Y direction can be adjusted. | Larger effective detection range, improving the magnification and
the detection efficiency of the product. |
| High-definition digital flat panel detector. Max Inclined Angle is 60°, samples can be observed with a unique perspective. | Easy to identify the side defects of the product and achieve no
dead angle detection. |
| Long life X-ray tube, maintenance free for life. | Adopt the world's top Japanese Hamamatsu X-ray source |
| Fault less than 2.5μm can be detected. High detection repeat
accuracy. | Easy to distinguish the gold wire bending and break of the
semiconductor package. |
| Powerful CNC Measuring Function, can test automatically, testing program can be edited. | Suitable for large-scale inspection and improve detection
efficiency. |
| Large inspection space, can put various large-sized samples. The
table can carry 10KG items. | Large table for large industrial control boards, ultra-long LED
strips, and electronic products for various fields |
| Large navigation view, table will move to where you click the
mouse. | Very easy to operate, quickly find item defects and improve
detection efficiency |
3.Hardware Technical Parameters
| Tube type | Sealed microfocus X-ray tube |
| Tube voltage | Tube voltage |
| Tube current | 10-200uA (software limited to 89uA ) |
| Focal spot size | 5-15μm |
| Cooling method | Convection cooling |
| Detector type | HD digital flat panel detector (FPD) |
| Imaging area | 130mm*130mm |
| Pixel matrix | 1536*1536 pixels |
| Inclined Angle | 0-60° |
| Repeated test accuracy | 3μm |
| Software inspection speed | 3.0s/point (Excluding loading and unloading time) |
| Standard size | 540mm*450mm |
| Effective inspection area | 500mm×420mm |
| Load capacity | ≤5Kg |
| Operating platform | Mouse, keyboard, 2 operating modes |
| Inner lead plate | 5 mm thick lead plate (isolate radiation) |
| Dimensions | 1245mm(L) * 1230mm(W) * 1900mm(H) |
| Weight | 1170Kg |
| Power supply | AC 110-220V (+10%)(international general power supply) |
4.Software technical parameters
| BGA short | Preset NG images, software contrasts and recognizes automatically |
| BGA false solder | Preset NG images, software contrasts and recognizes automatically |
| Area measurement | Preset area size standard, NG product prompt function. |
| Size measurement | Distance, gold line curvature, slope, angle, etc. |
| Automatic positioning | Power on table auto zero function, system reset |
| Control mode | CNC Automatic control, manual control keyboard, mouse, 3 modes are
optional. |
5.Table Control
1. Speed of table can be adjusted by the spacebar: low, normal and
high speed.
2. X, Y, Z three-axis motion and inclined angle are controlled by
keyboard.
3. Large navigator view, clear navigation image, table will move to
where you click the mouse.
6.CNC Programming
1. Simply click the mouse and you can write programs.
2. Object table moves along X, Y direction for positioning; X-ray
tube and detector move along Z direction for positioning.
3. Voltage and current set by software.
4. Image settings: brightness, contrast, auto gain and exposure
5. Users can change the pause time for program conversion.
6. Anti-collision system can maximize the tilt and observation of
the workpieces.
7. Automatic analysis on diameter, proportion of cavity, area and roundness of BGA.
7.X-Ray Working Principle
